Vega VEGACONNECT 4 Manuel d'utilisateur télécharger pdf (Page 8)

3.3 Operatio

The adjustment is carried out via a Windows PC with a parameter

adjustment software such as PACTware with respective DTM. There

are no adjustment elements on the instrument itself.

3.4 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its

capacity to handle normal loads during transport is assured by a test

according to DIN EN 24180.

The packaging of standard instruments consists of environment-

friendly, recyclable cardboard. For special versions, PE foam or PE foil

is also used. D ispose of the packaging material via specialised

recycling companies.

Transport must be carried out under consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or

concealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored a ccording to the orientation and storage markings on the

outside.

Unless otherwise indicated, the packages must be stored only under

the following conditions:

l Not in the open

l Dry and dust free

l Not exposed to corrosive media

l Protected against solar radiation

l Avoiding mechanical shock and vibration

l Storage and transport temperature see chapter "Supplement -

Technical data - Ambient conditions"

l Relative humidity 20 … 85 %

Packaging

Transport

Transport inspection

Storage

Storage and transport

temperature

8 VE

GACONNECT 4 with connection box • Interface converter USB - HART/I²C

3 Produc

t description

32628-EN-091118

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Pas de commentaire

Vega VEGACONNECT 4 Manuel d'utilisateur Page 8